Overview of ICOMOX™ SMARTMESH IP
The Smart Condition Monitoring Box is an open development platform for Condition Based Monitoring (CBM) of industrial equipment, assets and structures.
iCOMOX™ monitors operating conditions from the surface of the equipment to identify potential failures and reduce risks associated with equipment operation and maintenance. This extends equipment life, reduces unplanned downtime, cuts maintenance costs, and unlocks potential energy savings.
Main benefits
- Open sensor platform with embedded cloud
- Multi-sensors: vibration, magnetic, temperature and sound sensors
- High dynamic range and exceptional SNR for vibration analysis
- High-performance acoustic emission detection
- Non-invasive current sensor for motor current signature analysis
- Ultra-low power consumption with SensorStrobe™ technology
- Highly reliable wireless SmartMesh™ IP 2.4GHz 802.15.4e communication for harsh industrial environments
- SW is embedded and analyzed for early detection of machine failures in CBM applications
- Ability to configure alarm and alarm levels and timestamp events for each sensor
- CE and FCC certified with IP66 . enclosure
- Very compact form factor for mounting outside and under the hood
- Various mounting adapters to accommodate multiple types monitored device
- Easy to install, use and maintain platform concept
Specifications of ICOMOX™ SMARTMESH IP
APPLICATION PROCESSOR
- ADuCM4050 from Analog Devices
- Ultra-low power ARM® Cortex®-M4F MCU with integrated power management
- SensorStrobe™ technology saves 10x system-grade power
- Memory – 512 kB of embedded flash memory with ECC and 128 kB of configurable system SRAM with parity
- Analog Peripherals – 12-bit SAR ADC, 1.8 MSPS, 8 channels
- Security – hardware cryptographic accelerator supporting AES-128, AES-256 and SHA-256
VIRBRATION SENSOR
- ADXL356 from Analog Devices
- Low noise, low drift, low power, 3-axis MEMS accelerometer
- ±10g, ±20g and ±40g . ranges
- 5.5kHz resonant frequency with adjustable analog output bandwidth
- Excellent long-term stability from −40 °C to +125 °C
- Built-in temperature sensor
SCHOL SENSORS
- Bosch’s BMM150
- Low power and low noise 3-axis magnetic field sensor
- Extended measuring range ± 1300 t (x-, y- axis) and ± 2500µT (z-axis) with 0.3µT resolution
- Output bandwidth adjustable > 300Hz
SOUND SENSOR
- IM69D130 from Infineon
- High performance microphone with dual backplane MEMS technology
- 105dB Dynamic Range and 69dB(A) SNR
- Less than 1% THD at 128 dBSPL
- Flat frequency response with low frequencies off at 28Hz
TEMPERATURE SENSOR
- ADT7410 from Analog Devices
- ±0.5°C precision with 16-bit resolution
- Temperature range −55 °C to +150°C
- Programmable interrupt
COMMUNICATE
- LTC5800-IPM from Analog Devices
- SmartMesh IP 2.4 GHz, 802.15.4e SoC as a wireless chip, electronic manager or access point in a SmartMesh IP network
- Complete radio transceiver, embedded processor and network software to form a self-healing network
- Micrium μCOS-II . Real-Time On-Chip SDK
- > 99.999% network reliability achieved in the most challenging RF environments
OTHER FEATURES
- Ultra-low power, low ADXL362 from Analog Devices to unlock additional system-level power savings
- Optional micro-SD card for data logging
- USB to serial UART interface, USB 2.0 full speed compatible
- Two LED status lights
- Up to 2x CR2477 coin batteries for extended battery life
- Operating temperature from -40°C to 85°C
- Basic FFT and Time Domain Analysis in MCU by Default
- Advanced SW and analysis for on-demand early failure detection
- User-programmed sensor interrupts to trigger events
- Cloud connectivity via optional SmartMesh™ IP gateway or USB network manager
- Optional cloud apps and advanced analytics
- Easy to use interface
