CJ1 . gas cylinder
- For the double acting type, the pipe orientation of the coupling on the face
cap bar change within 90°.
Battery Cylinder CJP2 / CDJP2 / CJP
- Two automatic switches can be installed even on lines 4, 5
- Can connect a 2 One-touch and speed controller
- With auto switch (CDJP2 series: CDJP2)
CJ2 / CDJ2 . Air Cylinder
- Dual head and foot flanges have been added to the available mounting styles.
- Easy to fine-tune automatic switch position
- The mounting model, strip or rail for the automatic switch can be selected with the model number.
- Part numbers with bar end brackets and/or angle brackets are available. (No need to order separately a holder for the applicable cylinder.)
- With auto switch (CDJ2 series: CDJ2, CDJ2W, CDJ2K, CDJ2Z, CDJ2ZW, CDJ2RA, CDJ2RK)
CJ2 Air Cylinder Compact Type CJ2-X3175
Compact, lightweight
- Maximum overall length. 25% off
- Weight Max. 27% off
New rail style automatic switch holder
- Applies to D-M9 (Can be installed directly)
The specifications are the same as those of the existing CJ2 series.
JCM / JCDM . gas cylinder
- Overall length shortened to 97 mm
- Weight reduced by up to 54% (0.69 kg → 0.32 kg)
- There are different types of lids.
- Port Size: M5 and Rc1/8
- Male and female rod ends available.
- With automatic switch (JCDM series: JCDM)
CM2 / CDM2 . Air Cylinder
- Busbar ends are available as standard.
- Easy to adjust the auto switch position easily.
- Single column and rod holders are available.
- Part numbers are available with rod end holders and/or shaft holders. (It is not necessary to order a separate holder for the applicable cylinder.)
- With auto switch (CDM2-Z series: CDM2, CDM2W, CDM2K, CDM2KW, CDM2R, CDM2RK, CDM2□P, CDBM2)
Air Cylinder/ short type CM3/CDM3
- Up to 66mm shorter, up to 21% lighter (Compared to CM2 series)
- The female rod tip is available as standard.
- With auto switch (CDM3 Series: CDM3)
CG1 / CDG1. Air Cylinder
- Busbar ends are available as standard.
- Easy to fine-tune automatic switch position
- No shaft-mounted female thread has been added to the basic type.
- Part numbers are available with rod end holders and/or shaft holders. (It is not necessary to order a separate holder for the applicable cylinder.
- With auto switch (CDG1-Z series: CDG1, CDG1W, CDG1K, CDG1KW, CDG1R, CDG1KR, CDBG1)
Air Cylinder/ Short type CG3 / CDG3
- Up to 51 mm shorter, up to 24% lighter (Compared to CG1 series)
- The female rod tip is available as standard.
- With auto switch (CDG3 Series: CDG3)
