KR IONTEC

KR IONTEC is the robot with the best shell compared to the robots in its class and has a load capacity of 30 to 70 kg. KR IONTEC gripper   is covered with a waterproof and dustproof protective coating. In addition, KR IONTEC is applicable in the foundry industry with an ambient temperature range of 0° to 55°C.

1. Easy setup of processes

Thanks to the digital setup mode, users can tailor the robot’s performance to different processes, depending on the needs of each application.

2. Low maintenance requirements

KR IONTEC only needs to change the oil after 20,000 hours of operation.

The robot also has an in-line gripper wrist design without a belt.

3. Save the use area

KR IONTEC with compact design does not take up too much installation space. Help businesses use the work area effectively.

4. Low repair cost

KR IONTEC requires 50% fewer spare parts than the old model. And other spare parts are available for 25 years, making it possible for businesses to plan for the long term.

5. Load capacity can be switched

Businesses can change the load capacity of KR IONTEC allowing maximum flexibility in the use of Robots in the production process.

6. Simple operation:

It doesn’t take much training to operate KR IONTEC.

7. Optimal power supply system

The hollow shaft A1 with a diameter of 119 mm ensures power supply with minimal footprint.

8. ESD protection

The robot is protected as standard against uncontrolled charging or discharging.